The Shopee and Lazada buttons open that model’s search on each shop. If an affiliate URL is added later, we may earn a commission. Rank is not sold. The “Buy on brand site” button opens the maker’s page when we have one. Read the disclosure
How to choose a Xiaomi air purifier
Walk up the room band, and keep the test method beside the number. Xiaomi models overlap. The way you break the tie is the coverage method, the particle CADR, and whether a formaldehyde CADR is actually printed. A comparison across brands is which air purifier brand is best.
Check the coverage area and the method behind it
Measure your room, length by width. Then see which Xiaomi band contains it. Some rooms on these models are a GB/T band. Some square metres are a 2-air-change room. Those are different methods. A larger number from the 2-air-change method is not automatically a bigger machine than a smaller GB/T band.
Do not set a 2-air-change area next to another brand’s room and decide which machine is bigger. Another brand’s area at a stated air-change rate, including a figure near 60 m², is that brand’s method. It is not a GB/T band you can subtract from a Xiaomi number.
Where two Xiaomi bands cover the same room, take the smaller one if you are at the low end and price comes first. Take the model whose band reaches higher if the room can grow or you want margin.
Check particle CADR inside the same method
Particle or PM CADR is the dust rate for that band, in cubic metres per hour. Use it when you compare Xiaomi models that share the same kind of room figure. A higher CADR moves filtered air through that room faster. It does not rewrite the method behind the square metres.
Fan noise and wattage are separate lines. They do not replace a missing CADR. If you are comparing a GB/T model with a 2-air-change model, say that the room figures differ before you treat the CADR gap as the whole story.
Formaldehyde CADR is its own line, also in cubic metres per hour. A TVOC figure is not that line. If the spec page has no formaldehyde CADR, leave it out of the comparison. A strong particle CADR does not invent a gas CADR.
99.97% at 0.3 μm is the filter media for particles. It is not a formaldehyde result. If gas is the reason you are buying, use the formaldehyde page, which keeps only models with a printed gas CADR. Add the first replacement filter to the price. Carbon weight on the spec is not a substitute for checking how many months the filter is rated to last.
Break a tie without mixing the methods
If two models both fit the room, write the method next to the square metres before you look at the price. A GB/T band and a 2-air-change room can overlap a real floor plan and still be different claims. Particle CADR compares fairly inside one method. Formaldehyde CADR joins the note only when it is printed, and a TVOC figure does not fill that box. A filter percentage at 0.3 μm stays a fact about the media. The cheaper Xiaomi can be the right one at the low end of a band, and the wrong one if the area method was ignored.